Virtus Power

Virtus Power offers several options on a movie set.

 

With professional interfaces many electronically devices can be powered with only one power source. 

Support your camera, your headlight, charge you cell phone, your tablet and record your film on an external recorder. All this with only one power source.

 

Energized with a V-mount adaptor, with an input voltage of 10-19 Volt, Virtus Power allows you to support different components with different operating voltages.


Three 6-pin Hirose sockets can release either 7,5VDC or 8,6VDC as constant electric tension.

A direct voltage loop of the complete 14,4V DC up to 19VDC is possible as well.

Every Hirose sockets has a bayonet connector witch to prevent unintended release of the cable.

 

Virtus Power   has a 2pin D-tap output witch guarantees compatibility with most camera accessories.

With a USB type2 output Virtus Power   can charge a cell phone or tablet while recording.

During long period movie shoots with for example an iPad based teleprompter this extra power supply is.

 

The different operating voltages of Virtus Power   will exclusively regulated by high efficiently

DC/DC - converter. This allows that 100% power of the battery is reaching the point of need.

Evolution of heat, as known from conventionally DC/DC converters, thus is avoided.

 

Power Supply System:

 Input voltage: 10V-19V DC via V-Mount
Output voltage, unregulated: 10V-19V DC via D-Tap/Hirose; max. current 6A total
Output voltage, regulated: 7,V DC/8,6V DC via Hirose, socket 1 3A

5V DC/2A via USB type 2, socket 2+3 together 3A
Connections:

USB type 2
output
D-Tap 2pin
output
Hirose 6 pin socket (3x)


- 7,5 switchable for handheld camcorder

- 8,6V switchable for DSLR cameras

- 14,4V for camera, recorder, head lights, etc.

- 15mm rod mount

- V-Mount adaptor 


Optional accessories: Diver mounting brackets for 15mm rods

Different cable for most actual camera systems


Scope of delivery: 1x Virtus Power

1x Virtus rb 15 rod bracket for 15mm rods


Dimension:  16,5 x 11 x 4 cm (6,3" x 4,3" x 1,57")
Weight:  approx. 450g

Euro 495,00 (zzgl. MwSt.)


Virtus HDMI

With the attachable Virtus HDMI the well known

Virtus Power will be upgraded to an HDMI to HD-SDI converter. Both units can be bolt together with low effort. The Virtus HDMI can be powered with the Virtus Power by using a power bus connector and requires no external power supply.


The Virtus HDMI allows HDMI signals to be shown on HD-SDI display while ensuring high

bitrates of 2.970 Gbit/s to give you high resolution signal without any loss.

For professionals this means that it is now easier to convert your high def HDMI signal with audio to SDI for long distance transmission and display your work on SDI display.  

Specifications  

 Input Port:

1x HDMI
Output Port: 1x BNC (DI/HD-SDI/3G-SDI)
Power Supply:  Internal by Virtus Power
   
ESD Protection Human body mode: ±8kV (air-gap dicharge) ±4kV (contact discharge)
Operating Temperature:  0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature:  -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity:  20 ~ 90% RH (non-condensing)
Power Consumption (max.): 5W
   
Dimension: 16,5 x 8,5 x 2,2cm (6,4" x 3,3" x 0,86")
Weight: approx. 320g
   
Optional accessories: Virtus bracket VB16 for 15mm rods
  Virtus bracket Horizontal VBH
  HDMI cable
  SDI cable
Features:

 

- SDI interface operates at                                               bitrates of 

2.970 Gbit/s, 2.970/1.001 Gbit/s, 1.485 Gbit/s, 1.485/1.001 Gbit/s and

270 Mb/s. 

- Supports HDMI input timings: 480i @ 59.94, 576i, 720p @ 50/59.94/60, 1080i @ 50/59.94/60,1080p @ 23.98/24/25/29.97/30/50/59.94/60  
- Converts HDMI signal to SDI: 

480i/576i to SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)

720p/1080i to HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s

or 1.485/1.001 Gbit/s) 1080p to 3G-SDI (SMPTE 424M/425M-AB,

at bitrates of 2.970 Gbit/s and 2.970/1.001 Gbit/s)  

  Supports SDI output distance up to 100 meters (3G-SDI), 200 meters (HD-SDI) or 300 meters (SD-SDI)

Euro 395,00 (zzgl. MwSt.)


Recommended accessories:

puhlmann.tv - Virtus

Virtus Bracket VB15 

 

Euro 69,00 (zzgl. MwSt.)

Virtus Bracket Hoizontal VBH 

 

Euro 89,00 (zzgl. MwSt.)

puhlmann.tv - Virtus cable

Virtus cable VC HRS-XLR - Hirose/XLR 

 

Euro 69,00 (zzgl. MwSt.)


puhlmann.tv - Virtus cable

Virtus cable VC HRS-C100 - Hirose/C100/300/500

 

Euro 69,00 (zzgl. MwSt.)

 

puhlmann.tv - Virtus cable

Virtus cable VC HRS-LPE6 - Hirose/Canon D5

 

Euro 69,00 (zzgl. MwSt.)

 

puhlmann.tv - Virtus cable

Virtus cable VC HRS-NPF - Hirose/Sony NPF batteries

 

Euro 69,00 (zzgl. MwSt.)

 

puhlmann.tv - Virtus cable

Virtus cable VC HRS-PANA - Hirose/Panasonic

 

Euro 69,00 (zzgl. MwSt.)

 

puhlmann.tv - Virtus cable

Virtus cabel VC HRS-BM - Hirose/Blackmagic

 

Euro 69,00 (zzgl. MwSt.)

 

puhlmann.tv - Virtus cable

Virtus cable VC HRS-DC - Hirose/low Voltage

 

Euro 69,00 (zzgl. MwSt.)

 

puhlmann.tv - Virtus cable

Virtus cable VC HRS-OE - Hirose/open end 12 V or 7,5V

 

Euro 49,00 (zzgl. MwSt.)

 

puhlmann.tv - Virtus cable

Virtus cable VC D-Tap - RED- D-Tap/RED

 

Euro 129,00 (zzgl. MwSt.)

 

puhlmann.tv - Virtus cable

Hirose 6pin (bayonet) to Nikon D4 and other Nikon cameras (D2H, D2Hs, D2X, D2Xs, D3, D3s, D3X, D200) 

Output: DC 12V (for usage with the Nikon D4 the Nikon Power Connector EP-6 is required!) 

Custom product - assembling on demand only - delivery time 2 weeks

Euro 129,00 (zzgl. MwSt.)

 


Alle Preise sind Nettopreise, zzgl. der bei Rechnungsstellung geltende gesetzliche Mehrwertsteuersatz. Alle Angaben und Preise sind freibleibend und können ohne vorherige Ankündigung geändert, entfernt oder ergänzt werden.

All prices are net prices plus value-added tax. All specifications and prices are subject to change without prior notification. Errors and changes excepted.